Vive Health Toilet Seat Riser with Arms — At Home Care Supplies
FREE SHIPPING TO THE CONTIGUOUS U.S. ON ALL ORDERS
FREE SHIPPING TO THE CONTIGUOUS U.S. ON ALL ORDERS
Skip to content
White toilet with gray handrails on a white background

Vive Health Toilet Seat Riser with Arms

by Vive Health
SKU LVA1071S
$69.99

Notify me when back in stock

Vive Health Toilet Seat Riser with Arms

Regain bathroom independence with the Raised Toilet Seat with Handles from Vive Health. Our toilet seat riser with handles lifts you 3.5 inches higher to eliminate painful squatting and twisting. Where regular bowls sit too low, this high toilet seat for elderly brings comfort within reach for post-surgery recovery and daily mobility needs.

Built from crack-resistant composite, our riser for toilet seat holds 300 pounds while fitting under your current seat. Padded aluminum handles on this toilet seat with arms give you solid grip points when lowering down or pushing up. Choose standard or elongated sizing for this adaptive toilet seat that installs in minutes without tools.

Foam-covered arms on these handicapped toilet seats detach quickly for cleaning or when extra space is needed. The toilet riser with handles works with any toilet that has an interior bowl lip. From hip replacements to arthritis management, our toilet seat for handicapped individuals restores confidence where it matters most.

Features

  • Adds 3.5" of Height: Reduces painful bending and twisting, making it significantly easier to sit down and stand up from the toilet
  • Universal Compatibility: Fits any standard or elongated toilet with interior lip, installing under existing seat for added stability
  • Tool-Free Installation: Quick setup under existing toilet seat using included hardware—no tools required for easy installation
  • Padded Comfort Handles: Removable aluminum handles with soft closed-cell foam padding provide secure, comfortable grip during transfers
  • Heavy-Duty Construction: Durable split-resistant composite material safely supports up to 300 pounds for reliable long-term use
  • Easy Maintenance: Seat riser and handles clean effortlessly with standard disinfectant solutions for optimal hygiene

Specifications

Uses:

  • Adds height to toilet seat for stability
  • Reduces bending and twisting during transfers
  • Ideal for elderly, post-surgery recovery, limited mobility
  • Perfect for arthritis, hip replacement, knee surgery recovery

Standard Seat Dimensions:

  • Length (Front to Back): 17.25"
  • Length Inside (Front to Back): 11.25"
  • Width (Left to Right): 13.89"
  • Width Inside (Left to Right): 10.25"
  • Height: 3.5"
  • Thickness: 2"
  • Handle Width: 22"
  • Handle Length: 12.5"
  • Distance Between Handles: 19"

Elongated Seat Dimensions:

  • Length (Front to Back): 19.25"
  • Length Inside (Front to Back): 13.25"
  • Width (Left to Right): 13.75"
  • Width Inside (Left to Right): 10"
  • Height: 3.5"
  • Thickness: 2"
  • Handle Width: 21.25"
  • Handle Length: 14.5"
  • Distance Between Handles: 19"

Weight Capacity:

  • Maximum: 300 pounds

Materials:

  • Durable composite construction
  • Corrosion-resistant aluminum handles
  • Soft closed-cell EVA foam padding
  • Split-resistant design

Installation Instructions:

  • Remove existing toilet seat and lid from toilet
  • Place toilet seat riser on toilet rim and center as needed (ensure lip underneath is inside bowl)
  • Attach original toilet seat and lid on top of riser using included hardware
  • Thread screws through holes in back of seat
  • Place plastic washers on top of screws and metal washers on bottom
  • Tighten each screw with butterfly nuts

Handle Attachment Instructions:

  1. Locate right side handle marked with "R" and blue arrow
  2. Locate left side handle marked with "L" and red arrow
  3. Press brass pin on each arm and slide into seat position (pin facing out)
  4. Listen for click and check pin emerges through positioning hole when properly installed

Features:

  • Removable handles for flexibility
  • Fits under existing toilet seat
  • No tools required for installation
  • Color-coded handle identification
  • Click-lock handle system
  • Easy-clean surface
  • Available in standard and elongated sizes

Care Instructions:

  • Wipe down seat riser and handles with traditional disinfectant solution
  • Clean regularly to maintain hygiene
  • Dry thoroughly after cleaning

What's Included:

  • Raised toilet seat with removable handles
  • 2x 6.125" long flathead screws
  • 2x round plastic washers (1.18" outer diameter)
  • 2x round metal washers (0.95" outer diameter)
  • 2x butterfly nuts
  • User manual
  • Lifetime guarantee

FAQ

How wide is the toilet elevator?

The raised toilet seat is 13.89” wide and the distance between the removable handles is 19” wide.

Does this riser sit under a regular toilet seat?

Yes! This riser can be installed under a regular toilet seat.

Does this only fit on standard toilets?

The raised toilet seat is available for both standard and elongated toilets.

How do I know if my toilet is standard or elongated?

Standard toilets are more circular and length and width measurements will be very close. Elongated toilets are more oval in appearance. The length of an elongated toilet will be several inches longer than the width. 

Will this work with my kohler toilet?

Yes, the riser can be used with any standard size toilet.

How high are the handles from the seat base?

The removable handles are 9.5” high from the toilet rim.

Can I use it without the handles?

Yes! The handles are optional and can be removed by pushing the locking pins and pulling the arms out of the base.

What is the maximum weight limit?

The riser safely supports up to 300 pounds.

Does the seat riser come with toilet seat and lid?

No, purchase only includes riser. You should attach your existing seat & lid to top of riser

Can this be used alone, without a regular toilet seat?

Yes! The raised toilet seat can be used alone.

How do I clean it?

The riser and handles can be wiped down with a traditional disinfectant solution.

How do I install the toilet seat riser?

  • Remove the existing toilet seat and lid from the toilet and place the toilet seat riser on the rim of toilet, ensuring the lip underneath the riser is inside the bowl.
  • Attach the original toilet seat and lid on top of the toilet seat riser using the included hardware.
  • Thread the screws through the holes in the back of the seat with the plastic washers on the top of each screw and the metal washers on the bottom.
  • Tighten each screw with the butterfly nuts for a secure fit.

Downloads